Refractory Gunning Mix
Kerui Refractory supplies refractory gunning mix for repairing and maintaining high-temperature furnace linings. Made from refractory aggregates, fine powders, binders, and functional additives.
-
Alumina, Magnesia, SiC-Containing, Insulating
Material Types
-
Repair & Maintenance
Application
-
Hot or Cold Repair
Construction Method
-
Dry Powder
Delivery Form


Refractory Gunning Mix Types by Material
1. High Alumina Gunning Mix — KR-HG Series
High alumina gunning mix is formulated with alumina-rich refractory aggregates and powders. It is suitable for compatible furnace linings requiring heat resistance, mechanical strength, and resistance to wear. The final performance depends on alumina content, bonding system, and service conditions.
Typical applications
- Selected steelmaking and reheating furnace areas
- Industrial furnaces and heaters
- Other compatible high-temperature equipment requiring lining repair
Reference technical data:
| Item | KR-HG-01 |
|---|---|
| Refractoriness (°C) | 1750 |
| Al₂O₃ (%) | ≥55 |
| SiO₂ (%) | ≤37 |
| Bulk Density After Drying at 110°C (g/cm³) | 2.2 |
| Cold Crushing Strength at 110°C × 24 h (MPa) | 21 |
| Cold Crushing Strength at 800°C × 3 h (MPa) | 18 |
| Cold Crushing Strength at 1300°C × 3 h (MPa) | 35 |
| Cold Bending Strength at 1300°C × 3 h (MPa) | 2.8 |
2. Magnesia Gunning Mix — KR-MG Series
Magnesia gunning mix uses magnesia-based refractory raw materials and suitable binders. It is designed for compatible basic refractory linings, particularly in steelmaking applications exposed to high temperatures, slag attack, and thermal cycling.
Typical applications
- Electric arc furnace (EAF) sidewalls and slag-line areas
- Selected converter repair areas
- Other steelmaking equipment requiring compatible magnesia-based gunning material
Reference technical data:
| Item | KR-MG-01 | KR-MG-02 | KR-MG-03 |
|---|---|---|---|
| MgO (%) | ≥87 | ≥75 | ≥65 |
| CaO (%) | — | ≤10 | ≤30 |
| Bulk Density (g/cm³) | ≥2.60 | ≥2.40 | ≥2.30 |
| CCS at 110°C × 24 h (MPa) | ≥15 | ≥15 | ≥15 |
| CCS at 1500°C × 3 h (MPa) | ≥25 | ≥20 | ≥20 |
| PLC at 1500°C × 3 h (%) | 0 to −1.5 | 0 to −2.5 | 0 to −3.0 |
3. Silicon Carbide-Containing Gunning Mix — KR-SC Series
Silicon carbide-containing gunning mix incorporates SiC into the refractory formulation for applications that require wear resistance and thermal-shock performance. Depending on the complete formulation, it may also be suitable for equipment exposed to erosion and demanding thermal conditions.
Typical applications
- Selected blast furnace tapping channels and runners
- High-wear areas in compatible industrial furnaces
- Other applications where the required SiC-containing formulation is confirmed to be suitable
Reference technical data:
| Item | KR-SC-01 | KR-SC-02 | KR-SC-03 |
|---|---|---|---|
| SiC (%) | ≥40 | ≥60 | ≥70 |
| Bulk Density (g/cm³) | ≥2.40 | ≥2.45 | ≥2.50 |
| CCS at 110°C × 24 h (MPa) | ≥40 | ≥50 | ≥60 |
| CCS at 1000°C × 3 h (MPa) | ≥60 | ≥70 | ≥80 |
| CMOR at 110°C × 24 h (MPa) | ≥6 | ≥8 | ≥9 |
| CMOR at 1000°C × 3 h (MPa) | ≥8 | ≥9 | ≥10 |
4. Insulating Gunning Mix — KR-IF Series
Insulating gunning mix is designed for compatible furnace areas where thermal insulation is a key requirement. Its lower density and thermal conductivity help meet insulation needs while maintaining the strength required for the intended lining application.
Typical applications
- Hot-blast stove insulation linings
- Combustion chambers and compatible hot-air ducts
- Industrial furnace walls and other suitable thermal equipment
Reference technical data:
| Item | KR-IF-01 |
|---|---|
| Maximum Service Temperature (°C) | 1000 |
| Bulk Density (g/cm³) | ≥1.0 |
| Cold Crushing Strength at 110°C × 24 h (MPa) | ≥5.0 |
| Cold Crushing Strength at 815°C (MPa) | ≥3.0 |
| Permanent Linear Change at 815°C × 3 h (%) | ±1.0 |
Note: The technical values above are reference values compiled from publicly available product information for comparable refractory gunning materials. The KR series codes are proposed page codes, not confirmed Kerui production grades. Final product specifications must be verified against Kerui Refractory’s actual formulations and test reports before publication.


Applications of Refractory Gunning Mix
The correct gunning mix depends on the equipment, repair location, existing lining, operating conditions, and required service performance.
Steel Industry
Gunning mix is used to repair selected areas of blast furnaces, electric arc furnaces, converters, and other steelmaking equipment. Material selection depends on the existing lining, slag exposure, operating temperature, and wear conditions.
Explore our Steel Industry Refractory Solutions.
Cement Industry
Gunning mix can repair selected areas of rotary kilns and related cement production equipment exposed to high temperatures, abrasion, and chemical attack. The suitable composition depends on the repair location, lining material, and operating conditions.
Explore our Cement Industry Refractory Solutions.
Glass Industry
Gunning mix may be suitable for repairing selected glass furnace areas, depending on the lining composition and operating environment. Material selection must consider service temperature, chemical compatibility with the glass process, and the specific repair requirements.
Explore our Glass Industry Refractory Solutions.
Other Industrial Applications
Gunning mix can support maintenance in other industrial furnaces and high-temperature equipment when the material matches the operating conditions. Selection depends on the lining structure, temperature, wear, and required repair method.
Explore our Monolithic Refractory Products for other unshaped refractory solutions.

Gunning Methods and Repair Conditions
Gunning mix selection involves two separate considerations: the application method and the temperature condition of the repair area.
Dry and wet gunning: Dry gunning and wet gunning describe how the material is prepared and conveyed during installation. Water addition, equipment configuration, and application procedures vary by product formulation. Always follow the grade-specific installation instructions.
Hot and cold repair:Hot repair refers to gunning onto a hot repair area, while cold repair is performed when the repair area is cold. Not every gunning mix is suitable for both conditions. The repair temperature, equipment, and bonding system must be considered when selecting a product.
Customized Refractory Gunning Mix from Kerui Refractory
Kerui Refractory provides refractory materials and customized solutions for high-temperature industrial applications. To help us recommend a suitable gunning mix, please provide:
- Furnace type and specific repair area
- Existing refractory lining material
- Operating temperature and repair temperature
- Preferred gunning method and available equipment
- Required technical properties and estimated quantity


