On November 10, 2026, the U.S. Department of Commerce initiated a circumvention inquiry involving certain magnesia-carbon bricks produced in China and exported to the United States. The inquiry concerns whether specific bricks containing a small amount of alumina fall within the scope of existing U.S. antidumping and countervailing duty orders.
The notice initiates an inquiry; it is not a final determination that a particular product or supplier is circumventing the orders. It also does not mean that all Chinese magnesia-carbon bricks are covered. Read the Federal Register notice dated November 10, 2026.
The notice describes a specific combination of product, chemistry, origin, and destination requirements:
| Item/Grade | ω (MgO)/% | ω (C)/% | Bulk Density (g/cm³) | Cold Crushing Strength/MPa | Apparent Porosity/% | High-temperature Bending Strength (1400℃*0.5h)/MPa | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| μ0 ≥ | Standard Deviation | μ0 ≥ | Standard Deviation | μ0 ≥ | Standard Deviation | μ0 | Standard Deviation | μ0 ≤ | Standard Deviation | μ0 ≥ | Standard Deviation | |
| MT-5A | 85.0 | 1.5 | 5.0 | 1.0 | 3.10 | 0.05 | 50.0 | 10.0 | 5.0 | 1.0 | / | / |
| MT-5B | 84.0 | 1.5 | 5.0 | 1.0 | 3.02 | 0.05 | 50.0 | 10.0 | 6.0 | 1.0 | / | / |
| MT-5C | 82.0 | 1.5 | 5.0 | 1.0 | 2.92 | 0.05 | 45.0 | 10.0 | 7.0 | 1.0 | / | / |
| MT-5D | 80.0 | 1.5 | 5.0 | 1.0 | 2.90 | 0.05 | 40.0 | 10.0 | 8.0 | 1.0 | / | / |
| MT-8A | 82.0 | 1.5 | 8.0 | 1.0 | 3.05 | 0.05 | 45.0 | 10.0 | 4.5 | 1.0 | / | / |
| MT-8B | 81.0 | 1.5 | 8.0 | 1.0 | 3.00 | 0.05 | 45.0 | 10.0 | 5.0 | 1.0 | / | / |
| MT-8C | 79.0 | 1.5 | 8.0 | 1.0 | 2.90 | 0.05 | 40.0 | 10.0 | 6.0 | 1.0 | / | / |
| MT-8D | 77.0 | 1.5 | 8.0 | 1.0 | 2.87 | 0.05 | 35.0 | 10.0 | 7.0 | 1.0 | / | / |
| MT-10A | 80.0 | 1.5 | 10.0 | 1.0 | 3.02 | 0.03 | 40.0 | 10.0 | 4.0 | 0.5 | 6.0 | 1.0 |
| MT-10B | 79.0 | 1.5 | 10.0 | 1.0 | 2.97 | 0.03 | 40.0 | 10.0 | 4.5 | 0.5 | / | / |
| MT-10C | 77.0 | 1.5 | 10.0 | 1.0 | 2.92 | 0.03 | 35.0 | 10.0 | 5.0 | 0.5 | / | / |
| MT-10D | 75.0 | 1.5 | 10.0 | 1.0 | 2.87 | 0.03 | 35.0 | 10.0 | 6.0 | 0.5 | / | / |
| MT-12A | 78.0 | 1.2 | 12.0 | 1.0 | 2.97 | 0.03 | 40.0 | 10.0 | 4.0 | 0.5 | 6.0 | 1.0 |
| MT-12B | 77.0 | 1.2 | 12.0 | 1.0 | 2.94 | 0.03 | 35.0 | 10.0 | 4.0 | 0.5 | / | / |
| MT-12C | 75.0 | 1.2 | 12.0 | 1.0 | 2.92 | 0.03 | 35.0 | 10.0 | 4.5 | 0.5 | / | / |
| MT-12D | 73.0 | 1.2 | 12.0 | 1.0 | 2.85 | 0.03 | 30.0 | 10.0 | 5.5 | 0.5 | / | / |
| MT-14A | 76.0 | 1.2 | 14.0 | 1.0 | 2.95 | 0.03 | 38.0 | 10.0 | 3.5 | 0.5 | 10.0 | 1.0 |
| MT-14B | 74.0 | 1.2 | 14.0 | 1.0 | 2.90 | 0.03 | 35.0 | 10.0 | 3.5 | 0.5 | / | / |
| MT-14C | 72.0 | 1.2 | 14.0 | 1.0 | 2.87 | 0.03 | 35.0 | 10.0 | 4.0 | 0.5 | / | / |
| MT-14D | 68.0 | 1.2 | 14.0 | 1.0 | 2.81 | 0.03 | 30.0 | 10.0 | 5.0 | 0.5 | / | / |
| MT-16A | 74.0 | 1.2 | 16.0 | 0.8 | 2.92 | 0.03 | 35.0 | 8.0 | 3.5 | 0.5 | 8.0 | 1.0 |
| MT-16B | 72.0 | 1.2 | 16.0 | 0.8 | 2.87 | 0.03 | 35.0 | 8.0 | 3.5 | 0.5 | / | / |
| MT-16C | 70.0 | 1.2 | 16.0 | 0.8 | 2.82 | 0.03 | 30.0 | 8.0 | 4.0 | 0.5 | / | / |
| MT-18A | 72.0 | 1.2 | 18.0 | 0.8 | 2.89 | 0.03 | 35.0 | 8.0 | 3.0 | 0.5 | 10.0 | 1.0 |
| MT-18B | 70.0 | 1.2 | 18.0 | 0.8 | 2.84 | 0.03 | 30.0 | 8.0 | 3.5 | 0.5 | / | / |
| MT-18C | 69.0 | 1.2 | 18.0 | 0.8 | 2.79 | 0.03 | 30.0 | 8.0 | 4.0 | 0.5 | / | / |
The notice says X-ray diffraction should be used to determine the alumina content under conditions that avoid creating alumina from aluminum during the analysis. That makes the grade-specific test method and import-time composition relevant to a product review.
A product name alone is not enough to determine whether a shipment is covered. Buyers and suppliers need to check the actual grade, its binder, its measured chemistry, and the destination of the shipment against the full notice and any later determinations.
The Department of Commerce opened the inquiry after reviewing a request and supporting information. The initiation itself does not resolve whether the products at issue fall within the existing orders. That question remains for the inquiry and subsequent determinations.
The notice states that Commerce intends to issue a preliminary determination within 150 days of publication and a final determination within 300 days, unless the inquiry is rescinded or extended. Importers and suppliers should check for official updates rather than treating the initiation notice as the final outcome.
For any potentially relevant U.S.-bound shipment, buyers and exporters can organize the following information by product grade and batch:
Published grade ranges can help with initial screening, but they do not replace batch-specific test results. For product-grade information, see Kerui’s magnesia-carbon brick specifications. For furnace and steelmaking applications, see the steel-industry refractory solutions.
Buyers should monitor later Commerce notices and compare any new scope language with the exact product and shipment documents they use. Where a shipment may be relevant, an importer or exporter should seek advice from a qualified trade professional based on the product’s actual composition and records.
The inquiry is limited to the products and conditions described in the official notice. A review of any individual grade or transaction requires its own technical and trade documentation.